1. Vehicles
  2. Project New Tent

Bad Starter

Read More
  • I had to take a dremel to the post to get the wires off due to the nut being welded to the post from it coming loose.

    I had to take a dremel to the post to get the wires off due to the nut being welded to the post from it coming loose.

  • I had to take a dremel to the post to get the wires off due to the nut being welded to the post from it coming loose.

    I had to take a dremel to the post to get the wires off due to the nut being welded to the post from it coming loose.

  • I had to take a dremel to the post to get the wires off due to the nut being welded to the post from it coming loose.

    I had to take a dremel to the post to get the wires off due to the nut being welded to the post from it coming loose.

  • I had to take a dremel to the post to get the wires off due to the nut being welded to the post from it coming loose.

    I had to take a dremel to the post to get the wires off due to the nut being welded to the post from it coming loose.

  • Note how there's no nut under the original wires...they're just pressed up against the plastic body!  So as the wires got warm the plastic melted and the wires got loose...which caused them to arc...which welded the nut to the post so there was no way to tighten it.

    Note how there's no nut under the original wires...they're just pressed up against the plastic body! So as the wires got warm the plastic melted and the wires got loose...which caused them to arc...which welded the nut to the post so there was no way to tighten it.

  • Note how there's no nut under the original wires...they're just pressed up against the plastic body!  So as the wires got warm the plastic melted and the wires got loose...which caused them to arc...which welded the nut to the post so there was no way to tighten it.

    Note how there's no nut under the original wires...they're just pressed up against the plastic body! So as the wires got warm the plastic melted and the wires got loose...which caused them to arc...which welded the nut to the post so there was no way to tighten it.

  • Note how there's no nut under the original wires...they're just pressed up against the plastic body!  So as the wires got warm the plastic melted and the wires got loose...which caused them to arc...which welded the nut to the post so there was no way to tighten it.

    Note how there's no nut under the original wires...they're just pressed up against the plastic body! So as the wires got warm the plastic melted and the wires got loose...which caused them to arc...which welded the nut to the post so there was no way to tighten it.

  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2023 SmugMug, Inc.